Software-defined storage (SDS) supports enterprise video surveillance by separating storage management from proprietary hardware, so capacity, throughput and resilience are controlled in software across standard servers. For surveillance servers, this means continuous multi-camera recording can be pooled, protected and scaled flexibly. This article answers the key questions about how SDS works, where it outperforms traditional SAN storage, and when to adopt it.
How does SDS handle continuous multi-camera video writes?
SDS handles continuous multi-camera video writes by managing recording as sustained sequential streams across a pool of drives, using memory and SSD caching to absorb bursts before data reaches high-density disks. The software layer decides where each stream lands, which keeps write performance steady as camera counts grow.
Surveillance workloads differ sharply from database workloads. Enterprise video recording is a constant, mostly sequential write load running 24 hours a day, often alongside simultaneous playback and analytics reads. Generic storage tuned for random access can struggle under this pattern, particularly when hundreds of streams write concurrently.
Secure Logiq’s Logiqal Video Volume (LVV), the software-defined storage layer within Logiqal Core Architecture, is engineered for high-throughput sequential video. It balances low-latency memory, high-speed SSD caching and high-density hard drives to keep archive performance high while remaining cost-effective. It also separates video data from metadata streams, which reduces disk fragmentation, improves archive stability and helps extend hard drive lifespan in analytics-heavy deployments.
What are the main advantages of SDS for surveillance?
The main advantages of SDS for surveillance are flexible scaling, efficient use of hardware, consolidated infrastructure and storage behaviour tuned to video workloads. Because intelligence sits in software, capacity and performance can be adjusted without redesigning the entire storage platform.
For integrators and IT managers, the practical benefits typically include:
- Workload-specific optimisation: storage behaviour can be tuned for sequential video rather than general-purpose IT data.
- Reduced server sprawl: compute and storage can be consolidated, allowing multiple security subsystems to share one platform.
- Smaller footprint: consolidation can reduce rack space, power draw and cooling demand, lowering both CAPEX and OPEX.
- Better analytics support: separating metadata from video reduces fragmentation as AI analytics generate more indexed data.
- Automated failover: software-driven failover and failback can improve availability without manual intervention.
Logiqal Core Architecture applies this approach by pairing SDS with virtualisation, allowing CCTV, access control, PIDS, fire and alarm software to be consolidated onto a single platform. The actual savings depend on the design, so they should be validated against each project’s requirements.
How does SDS compare with traditional SAN and NAS?
SDS runs storage services in software on commodity or purpose-built servers, while traditional SAN storage relies on dedicated arrays and fabric, and NAS provides file-level sharing over the network. SDS offers more flexibility, but SAN and NAS remain valid choices in certain environments.
Where SDS differs
A conventional SAN presents block storage from a dedicated array over a storage network, typically Fibre Channel or iSCSI. It is mature and well understood, but scaling can mean buying proprietary controllers and shelves. SDS moves those functions into software, which can reduce hardware lock-in and let storage grow alongside compute.
Where SAN and NAS still make sense
SAN is not inherently the wrong answer for CCTV. Large deployments with established storage teams, existing SAN fabric or strict governance around shared infrastructure may be well served by it. NAS can suit lighter recording or archive tiers, though sustained write performance and VMS support need careful checking. Direct-attached storage remains simple and effective for smaller recording servers.
The right choice depends on the complete architecture, not drive specifications alone. Secure Logiq’s Qatar University SAN storage case study shows a surveillance SAN deployment in practice.
How does SDS keep surveillance footage resilient and available?
SDS keeps surveillance footage resilient by combining data protection, redundancy and automated failover in software, running on hardware designed to avoid single points of failure. Resilience is a property of the whole system, so software and hardware must be designed together.
Two points are worth stating clearly. RAID is not a backup, and redundancy does not automatically guarantee uninterrupted recording. Protection against drive failure still needs a tested failover strategy, monitoring and, where required, a separate copy of critical footage.
Within Logiqal Core Architecture, automated failover and failback mechanisms are designed to keep services running if a node has a problem. At hardware level, Secure Logiq enterprise servers use dual enterprise SSDs in hardware RAID 1 for the operating system, isolating it from video storage. Recording arrays use surveillance-optimised drives in battery-backed hardware RAID (typically RAID 5, 6 or 60) with hot-swappable spares, while dual or quad redundant hot-swappable power supplies remove power as a single point of failure.
What hardware and VMS compatibility factors matter for SDS?
The key factors are sustained write throughput, drive and controller quality, network capacity, power and cooling resilience, and certified compatibility with the chosen VMS. An SDS layer performs only as well as the surveillance servers beneath it and the platforms recording to it.
When specifying SDS, check the following:
- VMS validation: confirm the hardware is tested and certified for your platform, such as Milestone XProtect, Genetec Security Center or Avigilon.
- Drive class: use drives rated for 24/7 surveillance workloads rather than desktop or general-purpose disks.
- Controller and RAID design: hardware acceleration and battery-backed cache help protect recordings during faults.
- Network bandwidth: camera streams, playback and replication traffic all compete for the same links.
- Analytics load: GPU-heavy analytics and metadata growth change storage and compute needs.
- Burn-in testing: soak testing before deployment helps expose faults early.
Secure Logiq builds servers optimised, tested and certified for leading VMS platforms, and its HD surveillance servers form the hardware foundation for these deployments. The Logiqal Benchmark utility can simulate camera resolutions, compression formats, frame rates and analytics workloads to validate throughput before physical deployment. For guidance on matching hardware to workload, see the selecting a server guide.
When should an enterprise move to software-defined storage?
An enterprise should consider software-defined storage when recording demands are outgrowing conventional storage, when server sprawl is driving up cost and complexity, or when analytics are generating heavy metadata. It is a design decision, not an automatic upgrade for every site.
Common triggers include:
- Camera counts, resolutions or retention periods increasing beyond the original design.
- Multiple separate servers for CCTV, access control and other subsystems that could be consolidated.
- Rising rack space, power and cooling costs.
- Archive instability or accelerated drive wear in analytics-heavy environments.
- A need for automated failover across critical sites such as transport hubs, campuses or city-wide monitoring.
Smaller, stable deployments may be better served by simpler direct-attached storage. For complex projects, an independent design review that analyses bandwidth, retention and analytics requirements end to end is the safest starting point. Secure Logiq’s system design team produces storage and bandwidth calculations and can guarantee the performance and retention of its engineered designs.
If you are weighing SDS against SAN, NAS or direct-attached storage for a new or expanding project, contact Secure Logiq to discuss your recording, retention and resilience requirements with an engineer.
Frequently Asked Questions
How do I size storage capacity and retention for an SDS-based surveillance system?
Start with the number of cameras, resolution, frame rate, compression codec (such as H.264 or H.265), recording mode (continuous or motion-based) and required retention period. Multiply the average bitrate per camera by retention time, then add headroom for analytics metadata, RAID overhead, hot spares and future camera growth. A bandwidth and storage calculation from a design team, or a simulation tool such as the Logiqal Benchmark utility, helps validate the numbers before you buy hardware.
How do I get started migrating from an existing SAN or direct-attached storage to SDS?
Begin with an audit of your current environment: camera counts, bitrates, retention targets, VMS version, network capacity and the age or health of existing storage. Then run an independent design review and, ideally, a pilot on one site or a subset of cameras before committing to a full migration. Plan the cutover so existing archive footage remains accessible for its required retention period, either by keeping the legacy storage in read-only mode or migrating the archive in phases.
What are the most common mistakes when deploying SDS for video surveillance?
The most frequent mistakes are using desktop-class drives instead of surveillance-rated ones, undersizing network links for combined recording, playback and replication traffic, and assuming RAID is a substitute for backup. Others include skipping burn-in and soak testing, ignoring metadata growth from AI analytics, and not confirming that the hardware is certified for the chosen VMS. Avoid these by validating the full design end to end before go-live.
What should I do if recordings drop frames or archive performance degrades after deployment?
First check the usual suspects: network saturation, a degraded or rebuilding RAID array, failing drives, and cache or controller faults. Then review whether analytics or playback load has grown beyond the original design, since this can push storage past its sustained write capacity. Use monitoring and benchmarking to compare real throughput against design figures, and add capacity, cache or nodes if the workload has outgrown the platform.
How often should I test failover and backup for surveillance storage?
Test failover and failback at commissioning and then on a regular schedule, for example quarterly or after any major software, firmware or network change. Simulate realistic faults such as pulling a drive, powering down a node or disconnecting a network link, and confirm that recording continues without gaps. For critical footage, also verify that a separate copy exists and that you can restore it, because redundancy alone is not a backup.
Can SDS support AI video analytics without hurting recording performance?
Yes, provided the design accounts for the extra load. Analytics generate indexed metadata and additional read activity, so separating metadata from video data, using SSD caching and sizing GPU and compute resources correctly all help protect recording performance. Always model the analytics workload during design rather than adding it later, and re-benchmark whenever you introduce new analytics features or increase camera counts.
Is SDS cost-effective for smaller surveillance deployments?
Not always. SDS tends to deliver the most value in larger or growing environments where consolidation, flexible scaling and automated failover offset the design effort. For small, stable sites with a handful of cameras, direct-attached storage on a well-specified recording server is often simpler and cheaper. Compare total cost of ownership, including power, cooling, rack space and management time, before deciding.
Related Articles
- How should SAN storage failover be tested in a critical surveillance system?
- How should SAN storage performance be tested before a CCTV system goes live?
- What is Logiqal Video Volume and why was it designed for video surveillance?
- What is the difference between a surveillance server and an NVR?
- What RAID level is best for HD surveillance servers?